Solar panels for warehouses in Salisbury
Most of the industrial stock around Salisbury carries a large, shallow-pitched roof that was never asked to do anything. The survey measures the roof, not the postcode: cladding profile, purlin centres, remaining sheet life and the load the frame can take.
923 kWh per kWp a year at this latitude, so a 500 kWp array models at about 462,000 kWh. Source: EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss.
Book a roof survey in SalisburyIllustrative layout for a unit of this size. Your own figures come from the roof survey.
Distribution centre solar across Wiltshire
What a roof in Salisbury actually generates
Modelled irradiation at this latitude is 1182 kWh per square metre a year in the plane of a shallow-pitched roof, which works out at 923 kWh for every kWp installed (EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss). That is around 4 percent above the mean across the towns we cover, which is as good as UK rooftop gets outside the south coast.
We survey across the SP postcode area, starting from SP2.
Wiltshire is the planning authority for most sites here, and the built-up area holds a population of about 47,690, so the stock here runs to trade counters, light industrial terraces and the occasional larger shed (ONS Census 2021 built-up areas).
Salisbury ranks 1 of 8 towns we cover in Wiltshire on modelled yield, against a national mean of 886 kWh per kWp. The county runs from 894 to 923, a spread of 29 kWh per kWp. Within Wiltshire that difference is small enough to ignore: where the building sits is not what decides this scheme, your consumption pattern is.
Solar already consented near SP2
From the government's Renewable Energy Planning Database, Q1 2026. These are the schemes on record in this postcode district, which is a fair guide to how the local network has been treating export applications.
| Scheme | Operator | Capacity | Mounting | Status |
|---|---|---|---|---|
| Salisbury City Hall - Solar PV Panels | Wiltshire Council | 0.18 MW | Roof | Awaiting Construction |
| Salisbury District Hospital, Odstock Road - Solar Panels | Salisbury NHS Foundation Trust | 0.76 MW | Roof | Awaiting Construction |
| Salisbury District Hospital, Odstock Road - Solar Panels | Salisbury NHS Foundation Trust | 0.19 MW | Roof | Awaiting Construction |
| Salisbury District Hospital, Odstock Road - Solar PV | Salisbury NHS Foundation Trust | 0.26 MW | Roof | Awaiting Construction |
| The Salisbury Hospice, Salisbury District Hospital - Solar PV Panels | Salisbury NHS Foundation Trust | 0.21 MW | Roof | Application Submitted |
Grid connection through Scottish and Southern Electricity Networks
Scottish and Southern Electricity Networks operates the distribution network across Wiltshire, so the export application goes to them. Anything larger than 3.68 kW per phase falls under G99, which means an application before commissioning rather than a notification afterwards. A constrained network is not the end of a scheme. Capping export costs little when the building already absorbs most of what the roof produces.
Across Wiltshire the planning database records 159 solar schemes totalling 1585 MW, of which 56 are operational (REPD Q1 2026).
Send us the postcode
Tell us where the unit is and roughly how big the roof is. We come back with what it can carry, what it would generate against your consumption, and the three ways to pay for it.
Lenzie Consulting Ltd arranges the survey and passes your details to our MCS-certified installation partner so they can quote.
Questions about solar in Salisbury
- How much does a warehouse roof in Salisbury generate?
- The model gives 923 kWh for every kWp installed here, so 500 kWp comes out at about 462,000 kWh a year before any shading losses. You need roughly 1,485 sqm of clear roof to fit it. Source: EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss.
- Does the grid around Salisbury have capacity?
- Scottish and Southern Electricity Networks is the distribution network operator for Wiltshire. Anything above 3.68 kW per phase connects under G99, and the application sets the export limit. We submit it as part of the design.
- Is planning permission needed for panels on a Salisbury unit?
- Usually permitted development covers it. We still put the question to Wiltshire before design sign-off, and we tell you early if a full application is needed rather than discovering it late.
- Has anyone near SP2 already done this?
- The planning database records 5 solar schemes in this postcode district, 5 of them roof mounted. That matters less as proof that it works and more as evidence of how the local network has been treating export applications. Source: Renewable Energy Planning Database, Q1 2026.