warehousesolarpanels Commercial rooftop PV, UK wide Book a roof survey

Solar panels for warehouses in Buxton

The economics of a Buxton rooftop array turn on how much of the generation the occupier uses on site. The survey measures the roof, not the postcode: cladding profile, purlin centres, remaining sheet life and the load the frame can take.

805 kWh per kWp a year at this latitude, so a 500 kWp array models at about 403,000 kWh. Source: EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss.

Book a roof survey in Buxton
96 m phase 1
Drawing Buxton unit
Roof 96 x 62 m
Array 500 kWp
Yield 403,000 kWh/yr
Scale 1:500 / Rev A / SK17

Illustrative layout for a unit of this size. Your own figures come from the roof survey.

Buxton / Derbyshire
Midlands logistics park beside a motorway junction, several roofs carrying arrays
Industrial stock of the kind we survey across East Midlands.

Warehouse rooftop solar across Derbyshire

What a roof in Buxton actually generates

Modelled irradiation at this latitude is 1025 kWh per square metre a year in the plane of a shallow-pitched roof, which works out at 805 kWh for every kWp installed (EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss). That is about 9 percent below the mean across the towns we cover, so the case here leans harder on how much you use on site rather than on raw generation.

Most of the units we look at here sit in the SK postcode area.

High Peak is the planning authority for most sites here, and the built-up area holds a population of about 20,050, so the stock here runs to trade counters, light industrial terraces and the occasional larger shed (ONS Census 2021 built-up areas).

FIG. 1 What a Buxton roof makes, month by month

What a Buxton roof makes, month by month

Modelled output per kWp installed, for a shallow-pitched south-facing array. Source: EU PVGIS v5.2.

0255075100Jan: 17 kWh per kWpJanFeb: 32 kWh per kWpFebMar: 65 kWh per kWpMarApr: 97 kWh per kWpAprMay: 114 kWh per kWpMay114 kWh Jun: 113 kWh per kWpJunJul: 114 kWh per kWpJulAug: 98 kWh per kWpAugSep: 74 kWh per kWpSepOct: 43 kWh per kWpOctNov: 24 kWh per kWpNovDec: 15 kWh per kWpDec

May produces 7.6 times what Dec does on the same roof. A 500 kWp array here models at about 403,000 kWh across the year, but it arrives unevenly, which is why we size against your summer daytime load and then look at whether storage is worth adding for the shoulder months.

Monthly figures as a table
MonthkWh per kWp500 kWp array
Jan178,500
Feb3216,000
Mar6532,500
Apr9748,500
May11457,000
Jun11356,500
Jul11457,000
Aug9849,000
Sep7437,000
Oct4321,500
Nov2412,000
Dec157,500
Source: EU PVGIS v5.2
FIG. 2 Buxton against the rest of Derbyshire
  • Long Eaton866
  • Derby862
  • Swadlincote856
  • Ilkeston855
  • Belper850
  • Matlock844
  • Chesterfield843
  • Buxton805

Buxton ranks 8 of 8 towns we cover in Derbyshire on modelled yield, against a national mean of 886 kWh per kWp. The county runs from 805 to 866, a spread of 61 kWh per kWp. On a 500 kWp array that is about 30,500 kWh a year between the strongest and weakest town in the county.

Bars are zero based, so length is proportional to the figure. Where a county is flat, that is the finding: location is not the lever, consumption is. Source: EU PVGIS v5.2, modelled per town

Solar already consented near SK17

From the government's Renewable Energy Planning Database, Q1 2026. These are the schemes on record in this postcode district, which is a fair guide to how the local network has been treating export applications.

Scheme Operator Capacity Mounting Status
Pennine Aggregates, Waterswallows Lane - Solar Panels B-Engineering Group 0.34 MW Roof Awaiting Construction
Old House Farm, Newhaven - Solar Panels T H Flower & Sons 0.19 MW Roof Awaiting Construction

Grid connection through National Grid Electricity Distribution

National Grid Electricity Distribution operates the distribution network across Derbyshire, so the export application goes to them. Anything larger than 3.68 kW per phase falls under G99, which means an application before commissioning rather than a notification afterwards. A constrained network is not the end of a scheme. Capping export costs little when the building already absorbs most of what the roof produces.

Across Derbyshire the planning database records 144 solar schemes totalling 904 MW, of which 27 are operational (REPD Q1 2026).

Book the survey

Send us the postcode

Tell us where the unit is and roughly how big the roof is. We come back with what it can carry, what it would generate against your consumption, and the three ways to pay for it.

Lenzie Consulting Ltd arranges the survey and passes your details to our MCS-certified installation partner so they can quote.

We pass your details to our MCS-certified installation partner so they can quote. Read the privacy notice.

Questions about solar in Buxton

How much does a warehouse roof in Buxton generate?
The model gives 805 kWh for every kWp installed here, so 500 kWp comes out at about 403,000 kWh a year before any shading losses. You need roughly 1,485 sqm of clear roof to fit it. Source: EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss.
Does the grid around Buxton have capacity?
National Grid Electricity Distribution is the distribution network operator for Derbyshire. Anything above 3.68 kW per phase connects under G99, and the application sets the export limit. We submit it as part of the design.
Is planning permission needed for panels on a Buxton unit?
Usually permitted development covers it. We still put the question to High Peak before design sign-off, and we tell you early if a full application is needed rather than discovering it late.
Has anyone near SK17 already done this?
The planning database records 2 solar schemes in this postcode district, 2 of them roof mounted. That matters less as proof that it works and more as evidence of how the local network has been treating export applications. Source: Renewable Energy Planning Database, Q1 2026.

Nearby

All Derbyshire locations